Coppia cavi di segnale Atlas Cables Hyper Integra
Vendo, come da foto, splendida coppia cavi di segnale (per collegare cd all'amplificatore), Atlas Cables Hyper Integra da 1 metro, dal rapporto qualità prezzo sbalorditivo, come si può verificare su internet. Un prodotto per veri audiofili. La coppia di cavi è praticamente nuova, con solo una decina di ore di rodaggio. Caratteristiche tecniche (in inglese): The Atlas Hyper Integra is a superior asymmetrical or unbalanced design with a well-defined impedance of 75 ohms. The central conductor is made from 80 strands of OCC of % purity and which is insulated by an extremely low-loss foamed polyethylene dielectric. The return conductor is a two-layer braid made from a total of 272 strands of Ultra-Pure Oxygen Free Copper. The double layer of tightly woven wire mesh also provides 100% rejection of radio frequency interference (RFI) ensuring that the music signal is free from any external interference or noise. The conductors are covered by a soft PVC sleeve in a gloss black finish. The Hyper is terminated with exclusive Atlas non magnetic RCA plugs. These plugs benefit from a solder free, cold weld interface between the pure OFC copper co-axial stranded conductors and the plug for both the going and return signals. Being free of solder, another barrier to the free-flow of the signal has been removed. The Integra plug employs two conjugate brackets: Conjugate bracket RCA plug These brackets grip the cable without compressing it. Compressing a coaxial causes the cable to alter its impedance from 75 Ohms thereby causing deletions. In a digital interface the impedance can drop to some 40 Ohms which causes reflections and jitter. The Integra plug lets more information through. The Integra plug with conjugate brackets entirely rejects radio frequency interference all the way from the plug to conductor interface so there's less deletions or interference. It contains four asymmetrical sleeves that are sprung and which spread.